Vdo oil temperature sending unit. For use with vdo oil temperature gauge (rvdo310012).

Range: 300 f / 150 c
Thread size: m14 x 1.5
Connection type: 90 angle 1/4" spade
Number on sender: 801/4/35

General Fitment

This is the sending unit needed to use the vdo 150psi oil pressure gauge, part number rvdo350041. This unit is appropriate for most four-cylinder engines.

Range: 150 psi / 10 bar
Warning contact: 11.4 psi
Ohmic range: 10-180
Thread: 1/8-27 npt
Number on sender: 30/15

General Fitment

These 1-1/2'' diameter mechanical gauges mount directly to any 1/8'' x 27 npt outlet in fuel line.

General Fitment

Years of research have revealed the best combination of colors for readability and reduced eye fatigue. The result: vdo’s cockpit instruments – great styling with uncompromising vdo quality. Highly visible fire-red pointer for instant recognition teamed up with a flat black dial for contrast and crisp, white numerals for high readability. Roof-style bezel to help shadow the dial. State-of-the-art production quality control of all gauges and tested in some of the toughest applications in the world. Vdo should be the only gauge good enough for your Porsche.

Oil pressure gauge, 0-150 psi, 12 vdc, voltage, ohmic range: 10-180, connection type: ¼” spade, mounting hole size 2 1/16". Sender required for gau...(choose a part on the right to read more)

General Fitment

Excellent reproduction of the factory center console vdo clock. Quartz movement correct size almost identical to the original expensive vdo original

View/Change Diagram

914 1970-76 - Electrical

This is the sending unit needed to use the vdo 80 psi oil pressure gauge, part number rvdo350040. This unit is appropriate for most four-cylinder engines.

Range: 80 psi / 5 bar
Ohmic range: 10-180
Thread: 1/4-18 npt
# on sender: 30/2

General Fitment

Years of research have revealed the best combination of colors for readability and reduced eye fatigue. The result: vdo’s cockpit instruments – great styling with uncompromising vdo quality. Highly visible fire-red pointer for instant recognition teamed up with a flat black dial for contrast and crisp, white numerals for high readability. Roof-style bezel to help shadow the dial. State-of-the-art production quality control of all gauges and tested in some of the toughest applications in the world. Vdo should be the only gauge good enough for your Porsche.

Mechanical water temperature gauge, 265 f, 12 vdc, voltage, connection type: 1/2-14 npt /144", mounting hole size 2 1/16". Sender included.

General Fitment

This vdo sender is required for the vdo water temperature gauge (rvdo310909) to function.

Range: 250f / 120 c
Thread size: 3/8-18 npt
Connection type: straight 1/4" spade
# on sender: 801/1/17

General Fitment

Scale: 0 - 80 psi & 0 - 5 bar

Vdo part no.: 310-936b
Gauge series: cockpit international
Type: gear oil temperature gauge
Connection: .250" spade
Mounting hardware: u-bracket
Diameter (metric): 52mm
Diameter: 2 1/16 in
Input type: analog
Voltage: 12v
Dial scale: dual
Range: 120 f - 300 f
Ohmic range: 322.1 - 18.6
Bezel color: black

Years of research have revealed the best combination of colors for readability and reduced eye fatigue. The result: vdo’s cockpit instruments – great styling with uncompromising vdo quality. Highly visible fire-red pointer for instant recognition teamed up with a flat black dial for contrast and crisp, white numerals for high readability. Roof-style bezel to help shadow the dial. State-of-the-art production quality control of all gauges and tested in some of the toughest applications in the world. Vdo should be the only gauge good enough for your Porsche.

Clock, 24 hour, 2 1/16 in., analog, electrical, black face, size 2 1/16".

General Fitment

View/Change Diagram

924 1976-79 - Electrical

924 1980-85 - Electrical

For direct-mount monitoring of fuel and oil pressure systems, rely on vdo 1 1/2" diameter mechanical pressure gauges. Precision-machined brass movements, built-in restrictors,and steel housings give you the accuracy and durability you need. Compatible with all fuel management systems from carburetors to fuel injection.

Type: mechanical pressure
Range: 100 psi
Bezel color: chrome
Mounting style: direct
Connection type: 1/8-27 npt

General Fitment

Will ship when ready.
Our 914 appearance group console is a work of art! an exact duplicate of the factory console, it is made of thicker wood and cut for the optional vdo gauges. All you will need is our console heater switch to complete the job. This console will give your 914 a plush, sophisticated look as well gauge what your 914 is doing! Gauges not included.

Note: these center consoles are built to order and will take between four to eight weeks before they are ready to ship.

General Fitment

As we all know the only way to install the optional oil pressure gauge is to replace the oil pressure switch with the much "fatter" oil pressure sender. this cannot be accomplished without cutting the sheet metal or extending the hole out of the sheet metal and attaching the sending unit. this hose will give you the needed length. (might need to grind down the male end for a proper fit)

Note: dual sending unit sold separately, part number rvdo360023 or rvdo360006.

General Fitment

Perfect fit reproduction 914 oil pressure gauge for your console, complete with installation gasket. This is the exact same size as the original factory console gauges (60mm) so fits perfectly in your console face plate. 0-80 psi, we have the oil pressure sending unit and the extension hose available as well. Use with sender rvdo360006 and extension hose b150752.

General Fitment

Rebuilt? No, you’ll think they are new! The number one vdo authorized rebuilder in the country does these for us and they are beautiful. Clear odometer. Sold on an exchange basis only. There is an additional core charge, which is refundable upon receiving your rebuildable gauge.

General Fitment

Our 914 appearance group console is a work of art! an exact duplicate of the factory console, it is made of thicker wood and cut for the optional vdo gauges. All you will need is our console heater switch to complete the job. This console will give your 914 a plush, sophisticated look as well gauge what your 914 is doing! Holes fit aftermarket 2 1/16" vdo gauges. Gauges not included.

Note: these center consoles are built to order and will take additional time to ship.

General Fitment

Our 914 appearance group console is a work of art! an exact duplicate of the factory console, it is made of thicker wood and cut for the optional vdo gauges. All you will need is our console heater switch to complete the job. This console will give your 914 a plush, sophisticated look as well gauge what your 914 is doing! this item is custom made to order and will take longer to ship.

General Fitment

This vdo triple cluster will fit in place of your combi instrument, works with original fuel sender, dual pressure sensor, temperature sender, and push-on connector included in kit, factory dash gasket, mounting brackets, nuts, bulbs, and sockets included, 6 or 12 volt operation, any u.s. Or metric face scales available. Please specify red or silver needles.

General Fitment

The oil pressure sending unit is a must for 914-6 high performance applications where oil pressure monitoring is critical. Works both the gauge and the warning light.

General Fitment

Vdo 1-400 psi copper tubing kit, 6 foot. Includes 1/8-27 & 1/4-18 npt adapters. copper tubing kit 6 ft. Long 0-400psi 1/8" diameter vdo 150-856 gauge accessories

General Fitment

Years of research have revealed the best combination of colors for readability and reduced eye fatigue. The result: vdo’s cockpit instruments – great styling with uncompromising vdo quality. Highly visible fire-red pointer for instant recognition teamed up with a flat black dial for contrast and crisp, white numerals for high readability. Roof-style bezel to help shadow the dial. State-of-the-art production quality control of all gauges and tested in some of the toughest applications in the world. Vdo should be the only gauge good enough for your Porsche.

Oil pressure gauge, 0-100 psi, 12 vdc, voltage, connection type: ¼” spade, mounting hole size 2 1/16".

General Fitment

This vdo blind cover fills in that empty gauge hole in your dash, giving a more finished look to your interior. It comes in 2-1/16" (52mm) diameter and matches the size of hole of many of the cockpit-series gauges.

General Fitment